Icon 2005 - Current Ford Super Duty F250 / F350 2.5" Stage 3 System (62502) View larger

ICON K62502 2.5" Stage 3 System


New product

ICON 2.5" Stage 3 System


2005-2016 Ford Superduty F250/F350 

More details

By buying this product you can collect up to 237 loyalty points. Your cart will total 237 points that can be converted into a voucher of $47.40.

More info


This 2.5” Leveling System is a great way to level your 4WD 2005-2011 F-350 Super Duty front to rear. The system’s components provide for better-than-stock ride quality and is perfect for the cost-conscious truck owner who wants a level truck and a smooth ride.  This stage 3 system upgrades the front and rear shocks to our 2.5" diameter Piggy-Back shocks for the ultimate in ride quality and performance.

For F-250 applications, a 4" block can be used in place of your factory 2" block, in turn leveling the truck from front to rear, allowing use of ICON Series Mono-tube Rear Shocks.

Technical Specs:

  • 50%increase in wheel travel
  • Less body-roll than stock truck
  • 2 ”more travel from ride height to front bump stops
  • State-of-the-art dual-rate coil spring
  • Application Specific Alignment Cams ensure proper Caster alignment
  • Lifetime guarantee that coil springs won’t sag
  • Clears 34" Tall Tires & 35" Tall Tires w/ Minor Trimming
  • No change in towing capacity
  • No drive shaft modifications needed
  • 100%Bolt-on system - no drilling,cutting or welding necessary for install
  • Made in the USA

System Contains:

  • 62510 - 2.5" Lift Dual Rate Coil-Spring w/ Alignment Cam Kit
  • 67700 - Front 2.5" Piggy-Back Shocks
  • 7701 - Rear 2.5" Piggy-Back Shocks
F-250 Rear Components
Due to the lower rear ride height the following components need to be added to level an F-250.  Please choose yes for F250 and they will be added to your cart.
  • 194275 - 4" Rear Blocks w/ Built in Bump Stops
  • 37003 - Rear U-Bolt Kit
***Must be added***
Please Note: When using the TEI Spacer (Part#61600) in conjunction with a FSD 2.5" Leveling Coil-spring Kit, the supplied alignment cams may not add enough castor and additional parts may be required