Warning: Last items in stock!
By buying this product you can collect up to 32 loyalty points. Your cart will total 32 points that can be converted into a voucher of $6.40.
|Product Type||Cold Air Intake Kits|
|Filter Type||Cotton Filter|
|2015||Ram||4500, Cab & Chassis||L6-6.7L, Diesel|
|2015||Ram||5500, Cab & Chassis||L6-6.7L, Diesel|
|2014||Ram||5500, Cab & Chassis||L6-6.7L, Diesel|
|2014||Ram||4500, Cab & Chassis||L6-6.7L, Diesel|
|2013||Ram||4500, Cab & Chassis||L6-6.7L, Diesel|
|2013||Ram||5500, Cab & Chassis||L6-6.7L, Diesel|
Uses replacement filter KF-1037
Uses the same motor that drives
Ram Active AirTM to activate its swing gate, giving you all the benefits of the stock system, plus much more. Draws air from the wheel well inlet under normal driving conditions or inclement weather conditions (ice, snow, rain) to protect against the elements.
In extreme heat, high loads, or high altitudes the swing gate pivots when your truck accelerates to full throttle, opening the ram-air duct mounted behind the front grille and exposing cooler and less restrictive air to your engine.
Our active monitoring light alerts you when the ram-air gate is open.
Testing shows that the ram-air inlet opens when outside temperatures are greater than 91°F and the truck is at full throttle. The ram-air inlet stays open for approximately 3-5 miles or until the truck slows to close to 5 mph. This process repeats itself. Ram-air activity varies with your driving conditions.
Unlike stock which uses only one inlet at a time, our kit gives you the option of massive dual inlet airflow. Simply remove the dam from the gate arm and re-attach when desired or to protect against inclement weather.
Note: The gate arm remains active even with the dam removed. This will prevent you from getting an Active Air Box code when both inlets are open. Dam MUST be used in harsh weather conditions including but not limited to rain, sleet, or snow as engine damage can occur. S&B is not responsible for engine damage due to failure to use the dam as instructed.
Silicone is a premium rubber which will seal better and last longer. It handles as much as 400° F without cracking or tearing. With a high friction surface and no oily residue, our silicone filters and couplers won’t slide off the tube or require you to wash your hands.
Add power and fun while still protecting your investment.